MARIA FLORENTINA
BARBES FERNANDEZ
Profesora Contratada Doctora
Publicacións (27) Publicacións de MARIA FLORENTINA BARBES FERNANDEZ
2021
-
TEM evaluation of steel nanocrystalline surfaces obtained by severe shot peening
Surface and Coatings Technology, Vol. 418
2019
-
Cryogenic study of the magnetic and thermal stability of retained austenite in nanostructured bainite
Science and Technology of Advanced Materials, Vol. 20, Núm. 1, pp. 673-687
2017
-
Microstructures of a pressure die cast Al-8.5%Si-3.5%Cu alloy
Kovove Materialy, Vol. 55, Núm. 2, pp. 89-96
-
Microstructures of a pressure die cast Al-8.5%Si-3.5%Cu alloy
Kovove Materialy, Vol. 55, Núm. 2, pp. 89-96
2015
-
Tribo-Corrosion protection of valves and rotors using cermet layers applied with hvof
Society of Tribologists and Lubrication Engineers Annual Meeting and Exhibition 2015
2014
-
Effect of pressure in the microstructure of die cast Al-8.5Si-3.5cu alloys
Materials Science and Technology Conference and Exhibition 2014, MS and T 2014
-
Transformations in the iron-manganese-oxygen-carbon system resulted from treatment of solar energy with high concentration
Steel Research International, Vol. 85, Núm. 10, pp. 1469-1476
2013
-
Cooling efficiency in furnace design
DYNA: revista de la Facultad de Minas. Universidad Nacional de Colombia. Sede Medellín, Vol. 80, Núm. 182, pp. 131-137
-
Structural ultrafine grained steels obtained by advanced controlled rolling
Journal of Iron and Steel Research International, Vol. 20, Núm. 1, pp. 62-70
2012
-
Caracterización físicoquímica de acreciones presentes en un horno de lecho fluidizado para la tostación de blenda
DYNA: revista de la Facultad de Minas. Universidad Nacional de Colombia. Sede Medellín, Vol. 79, Núm. 175, pp. 90-96
2010
-
Results of the application of the mdn in the improvement of the design of an electrical furnace that produces low carbon ferromanganese
ISIJ International, Vol. 50, Núm. 3, pp. 349-355
-
The nodal wear model (NWM) as an alternative to understand the mechanisms of flow and wear in the blast furnace crucible
Archives of Metallurgy and Materials, Vol. 55, Núm. 4, pp. 1113-1123
-
Ultrafine grained HSLA steels for cold forming
Journal of Iron and Steel Research International, Vol. 17, Núm. 10, pp. 50-56
2009
-
Aspectos Microestructurales de la corrosión química en un convertidor (PSC)
Boletín de la Sociedad Española de Cerámica y Vidrio, Vol. 48, Núm. 5, pp. 231-236
-
Bottom design optimisation of electric arc furnace for ferromanganese production using nodal wear model
Ironmaking and Steelmaking, Vol. 36, Núm. 7, pp. 529-536
-
Características sólido-fluido en el crisol del horno alto según el modelo de desgaste nodal (MDN)
Revista de metalurgia, Vol. 45, Núm. 4, pp. 295-304
-
Determinación de los coeficientes de capa límite mediante el Modelo de Desgaste Nodal (MDN) para el estudio de la corrosión del crisol de alto horno
Boletín de la Sociedad Española de Cerámica y Vidrio, Vol. 48, Núm. 3, pp. 153-156
2008
-
Design of blast furnace crucibles by means of the Nodal Wear Model
ISIJ International, Vol. 48, Núm. 2, pp. 134-140
2006
-
Furnace lining analysis and design by mathematical and physicochemical modeling
SOHN INTERNATIONAL SYMPOSIUM ADVANCED PROCESSING OF METALS AND MATERIALS, VOL 8
-
Furnace lining analysis and design by mathematical and physicochemical modeling
2006 TMS Fall Extraction and Processing Division: Sohn International Symposium