Publications (27) Publications de MARIA FLORENTINA BARBES FERNANDEZ

2021

  1. TEM evaluation of steel nanocrystalline surfaces obtained by severe shot peening

    Surface and Coatings Technology, Vol. 418

2019

  1. Cryogenic study of the magnetic and thermal stability of retained austenite in nanostructured bainite

    Science and Technology of Advanced Materials, Vol. 20, Núm. 1, pp. 673-687

2017

  1. Microstructures of a pressure die cast Al-8.5%Si-3.5%Cu alloy

    Kovove Materialy, Vol. 55, Núm. 2, pp. 89-96

  2. Microstructures of a pressure die cast Al-8.5%Si-3.5%Cu alloy

    Kovove Materialy, Vol. 55, Núm. 2, pp. 89-96

2015

  1. Tribo-Corrosion protection of valves and rotors using cermet layers applied with hvof

    Society of Tribologists and Lubrication Engineers Annual Meeting and Exhibition 2015

2014

  1. Effect of pressure in the microstructure of die cast Al-8.5Si-3.5cu alloys

    Materials Science and Technology Conference and Exhibition 2014, MS and T 2014

  2. Transformations in the iron-manganese-oxygen-carbon system resulted from treatment of solar energy with high concentration

    Steel Research International, Vol. 85, Núm. 10, pp. 1469-1476

2013

  1. Cooling efficiency in furnace design

    DYNA: revista de la Facultad de Minas. Universidad Nacional de Colombia. Sede Medellín, Vol. 80, Núm. 182, pp. 131-137

  2. Structural ultrafine grained steels obtained by advanced controlled rolling

    Journal of Iron and Steel Research International, Vol. 20, Núm. 1, pp. 62-70

2012

  1. Caracterización físicoquímica de acreciones presentes en un horno de lecho fluidizado para la tostación de blenda

    DYNA: revista de la Facultad de Minas. Universidad Nacional de Colombia. Sede Medellín, Vol. 79, Núm. 175, pp. 90-96

2010

  1. Results of the application of the mdn in the improvement of the design of an electrical furnace that produces low carbon ferromanganese

    ISIJ International, Vol. 50, Núm. 3, pp. 349-355

  2. The nodal wear model (NWM) as an alternative to understand the mechanisms of flow and wear in the blast furnace crucible

    Archives of Metallurgy and Materials, Vol. 55, Núm. 4, pp. 1113-1123

  3. Ultrafine grained HSLA steels for cold forming

    Journal of Iron and Steel Research International, Vol. 17, Núm. 10, pp. 50-56

2009

  1. Aspectos Microestructurales de la corrosión química en un convertidor (PSC)

    Boletín de la Sociedad Española de Cerámica y Vidrio, Vol. 48, Núm. 5, pp. 231-236

  2. Bottom design optimisation of electric arc furnace for ferromanganese production using nodal wear model

    Ironmaking and Steelmaking, Vol. 36, Núm. 7, pp. 529-536

  3. Características sólido-fluido en el crisol del horno alto según el modelo de desgaste nodal (MDN)

    Revista de metalurgia, Vol. 45, Núm. 4, pp. 295-304

  4. Determinación de los coeficientes de capa límite mediante el Modelo de Desgaste Nodal (MDN) para el estudio de la corrosión del crisol de alto horno

    Boletín de la Sociedad Española de Cerámica y Vidrio, Vol. 48, Núm. 3, pp. 153-156

2008

  1. Design of blast furnace crucibles by means of the Nodal Wear Model

    ISIJ International, Vol. 48, Núm. 2, pp. 134-140

2006

  1. Furnace lining analysis and design by mathematical and physicochemical modeling

    2006 TMS Fall Extraction and Processing Division: Sohn International Symposium

  2. Furnace lining analysis and design by mathematical and physicochemical modeling

    SOHN INTERNATIONAL SYMPOSIUM ADVANCED PROCESSING OF METALS AND MATERIALS, VOL 8