Publicaciones en las que colabora con Jesús Manuel Alegre Calderón (18)

2024

  1. Effect of electrochemical charging on the hydrogen embrittlement susceptibility of a low-alloyed tempered martensitic steel submitted to high internal pressure

    International Journal of Hydrogen Energy, Vol. 63, pp. 657-667

  2. Evaluating hydrogen embrittlement susceptibility of a 2205 DSS

    Procedia Structural Integrity

  3. Hydrogen Embrittlement of AISI 316L steel produced by Selective Laser Melting

    Procedia Structural Integrity

  4. Mechanical and Fatigue Properties of Ti-6Al-4V Alloy Fabricated Using Binder Jetting Process and Subjected to Hot Isostatic Pressing

    Materials, Vol. 17, Núm. 15

2023

  1. Caracterización de la fragilización por hidrógeno mediante ensayos de fractura hidráulica a elevada presión interna en el acero 42CrMo4: efecto del tamaño de grano

    Revista española de mecánica de la fractura, Núm. 6, pp. 9-14

  2. Comparative study of reference and additively manufactured 316L stainless steel: effect of conventional and severe shot peening treatments on microstructure and mechanical features

    Revista española de mecánica de la fractura, Núm. 5, pp. 269-274

  3. Comportamiento en fatiga de una aleación de Ti-6Al-4V fabricada mediante Binder Jetting

    Revista española de mecánica de la fractura, Núm. 5, pp. 275-280

  4. Hydrogen uptake and diffusion kinetics in a quenched and tempered low carbon steel: experimental and numerical study

    International Journal of Hydrogen Energy, Vol. 48, Núm. 90, pp. 35347-35365

  5. Influence of hydrogen on the hydraulic fracture behavior of a 42CrMo4 steel welds: Effect of the prior austenite grain size

    Engineering Fracture Mechanics, Vol. 289

  6. Phase field modelling to predict hydrogen-assisted failures in elastic-plastic materials

    Revista española de mecánica de la fractura, Núm. 5, pp. 169-174

2022

  1. Efecto de los parámetros de precarga electroquímica de hidrógeno sobre la fractura hidraúlica en depósitos miniatura entallados

    Revista española de mecánica de la fractura, Núm. 3, pp. 51-56

  2. Effect of HIP post-processing at 850 °C/200 MPa in the fatigue behavior of Ti-6Al-4V alloy fabricated by Selective Laser Melting

    International Journal of Fatigue, Vol. 163

  3. Hydraulic fracture behavior in the presence of hydrogen in notched miniature cylindrical specimens of a 42CrMo4 steel

    Engineering Fracture Mechanics, Vol. 274

  4. Parameter Optimisation in Selective Laser Melting on C300 Steel

    Applied Sciences (Switzerland), Vol. 12, Núm. 19

2021

  1. Fracture toughness of coarse-grain heat affected zone of quenched and tempered CrMo steels with internal hydrogen: Fracture micromechanisms

    Engineering Fracture Mechanics, Vol. 241

2020

  1. Simulation of hydrogen permeation through pure iron for trapping and surface phenomena characterisation

    Theoretical and Applied Fracture Mechanics, Vol. 110

2016

  1. Determination of the creep crack initiation properties using pre-cracked small punch tests

    Theoretical and Applied Fracture Mechanics, Vol. 86, pp. 39-44

2011

  1. Analysis of different techniques for obtaining pre-cracked/notched small punch test specimens

    Engineering Failure Analysis, Vol. 18, Núm. 8, pp. 2282-2287