Jesús Manuel
Alegre Calderón
Publications dans lesquelles il/elle collabore avec Jesús Manuel Alegre Calderón (18)
2024
-
Effect of electrochemical charging on the hydrogen embrittlement susceptibility of a low-alloyed tempered martensitic steel submitted to high internal pressure
International Journal of Hydrogen Energy, Vol. 63, pp. 657-667
-
Evaluating hydrogen embrittlement susceptibility of a 2205 DSS
Procedia Structural Integrity
-
Hydrogen Embrittlement of AISI 316L steel produced by Selective Laser Melting
Procedia Structural Integrity
-
Mechanical and Fatigue Properties of Ti-6Al-4V Alloy Fabricated Using Binder Jetting Process and Subjected to Hot Isostatic Pressing
Materials, Vol. 17, Núm. 15
2023
-
Caracterización de la fragilización por hidrógeno mediante ensayos de fractura hidráulica a elevada presión interna en el acero 42CrMo4: efecto del tamaño de grano
Revista española de mecánica de la fractura, Núm. 6, pp. 9-14
-
Comparative study of reference and additively manufactured 316L stainless steel: effect of conventional and severe shot peening treatments on microstructure and mechanical features
Revista española de mecánica de la fractura, Núm. 5, pp. 269-274
-
Comportamiento en fatiga de una aleación de Ti-6Al-4V fabricada mediante Binder Jetting
Revista española de mecánica de la fractura, Núm. 5, pp. 275-280
-
Hydrogen uptake and diffusion kinetics in a quenched and tempered low carbon steel: experimental and numerical study
International Journal of Hydrogen Energy, Vol. 48, Núm. 90, pp. 35347-35365
-
Influence of hydrogen on the hydraulic fracture behavior of a 42CrMo4 steel welds: Effect of the prior austenite grain size
Engineering Fracture Mechanics, Vol. 289
-
Phase field modelling to predict hydrogen-assisted failures in elastic-plastic materials
Revista española de mecánica de la fractura, Núm. 5, pp. 169-174
2022
-
Efecto de los parámetros de precarga electroquímica de hidrógeno sobre la fractura hidraúlica en depósitos miniatura entallados
Revista española de mecánica de la fractura, Núm. 3, pp. 51-56
-
Effect of HIP post-processing at 850 °C/200 MPa in the fatigue behavior of Ti-6Al-4V alloy fabricated by Selective Laser Melting
International Journal of Fatigue, Vol. 163
-
Hydraulic fracture behavior in the presence of hydrogen in notched miniature cylindrical specimens of a 42CrMo4 steel
Engineering Fracture Mechanics, Vol. 274
-
Parameter Optimisation in Selective Laser Melting on C300 Steel
Applied Sciences (Switzerland), Vol. 12, Núm. 19
2021
-
Fracture toughness of coarse-grain heat affected zone of quenched and tempered CrMo steels with internal hydrogen: Fracture micromechanisms
Engineering Fracture Mechanics, Vol. 241
2020
-
Simulation of hydrogen permeation through pure iron for trapping and surface phenomena characterisation
Theoretical and Applied Fracture Mechanics, Vol. 110
2016
-
Determination of the creep crack initiation properties using pre-cracked small punch tests
Theoretical and Applied Fracture Mechanics, Vol. 86, pp. 39-44
2011
-
Analysis of different techniques for obtaining pre-cracked/notched small punch test specimens
Engineering Failure Analysis, Vol. 18, Núm. 8, pp. 2282-2287