Publicaciones en colaboración con investigadores/as de Universidad de Burgos (27)

2023

  1. Influence of hydrogen on the hydraulic fracture behavior of a 42CrMo4 steel welds: Effect of the prior austenite grain size

    Engineering Fracture Mechanics, Vol. 289

2022

  1. Effect of siderurgical aggregates on concrete exposed to saline environments

    Construction and Building Materials, Vol. 352

  2. Hydraulic fracture behavior in the presence of hydrogen in notched miniature cylindrical specimens of a 42CrMo4 steel

    Engineering Fracture Mechanics, Vol. 274

  3. Notch fracture predictions using the Phase Field method for Ti-6Al-4V produced by Selective Laser Melting after different post-processing conditions

    Theoretical and Applied Fracture Mechanics, Vol. 121

2021

  1. Fracture toughness of coarse-grain heat affected zone of quenched and tempered CrMo steels with internal hydrogen: Fracture micromechanisms

    Engineering Fracture Mechanics, Vol. 241

  2. Influence of non-homogeneous microstructure on hydrogen diffusion and trapping simulations near a crack tip in a welded joint

    Theoretical and Applied Fracture Mechanics, Vol. 112

  3. Mode II fracture of an MMA adhesive layer: Theory versus experiment

    European Journal of Mechanics, A/Solids, Vol. 86

  4. TAFMEC special issue on hydrogen embrittlement of metallic materials: Fatigue and fracture

    Theoretical and Applied Fracture Mechanics

2020

  1. Analysis of hydrogen permeation tests considering two different modelling approaches for grain boundary trapping in iron

    International Journal of Fracture, Vol. 223, Núm. 1-2, pp. 17-35

  2. Generalised boundary conditions for hydrogen transport at crack tips

    Corrosion Science, Vol. 173

  3. Influence of charging conditions on simulated temperature-programmed desorption for hydrogen in metals

    International Journal of Hydrogen Energy, Vol. 45, Núm. 43, pp. 23704-23720

  4. Mode II Fracture of an Elastic-Plastic Sandwich Layer

    Journal of Applied Mechanics, Transactions ASME, Vol. 87, Núm. 3

  5. SPT analysis of hydrogen embrittlement in CrMoV welds

    Theoretical and Applied Fracture Mechanics, Vol. 110

  6. Simulation of hydrogen permeation through pure iron for trapping and surface phenomena characterisation

    Theoretical and Applied Fracture Mechanics, Vol. 110

2019

  1. Cold isostatic pressing to improve the mechanical performance of additively manufactured metallic components

    Materials, Vol. 12, Núm. 15

  2. Pre-notched dog bone small punch specimens for the estimation of fracture properties

    Engineering Failure Analysis, Vol. 96, pp. 236-240

  3. The Essential Work of Fracture parameters for 3D printed polymer sheets

    Materials and Design, Vol. 181

2016

  1. Application of the miniature small punch test for the mechanical characterization of polymer materials

    Theoretical and Applied Fracture Mechanics, Vol. 86, pp. 78-83

  2. Damage modeling in Small Punch Test specimens

    Theoretical and Applied Fracture Mechanics, Vol. 86, pp. 51-60

  3. Determination of the creep crack initiation properties using pre-cracked small punch tests

    Theoretical and Applied Fracture Mechanics, Vol. 86, pp. 39-44