Andrés
Díaz Portugal
Andrés Díaz Portugal-rekin lankidetzan egindako argitalpenak (15)
2023
-
Caracterización de la fragilización por hidrógeno mediante ensayos de fractura hidráulica a elevada presión interna en el acero 42CrMo4: efecto del tamaño de grano
Revista española de mecánica de la fractura, Núm. 6, pp. 9-14
-
Influence of hydrogen on the hydraulic fracture behavior of a 42CrMo4 steel welds: Effect of the prior austenite grain size
Engineering Fracture Mechanics, Vol. 289
-
Phase field modelling to predict hydrogen-assisted failures in elastic-plastic materials
Revista española de mecánica de la fractura, Núm. 5, pp. 169-174
2022
-
Efecto de los parámetros de precarga electroquímica de hidrógeno sobre la fractura hidraúlica en depósitos miniatura entallados
Revista española de mecánica de la fractura, Núm. 3, pp. 51-56
-
Hydraulic fracture behavior in the presence of hydrogen in notched miniature cylindrical specimens of a 42CrMo4 steel
Engineering Fracture Mechanics, Vol. 274
-
Notch fracture predictions using the Phase Field method for Ti-6Al-4V produced by Selective Laser Melting after different post-processing conditions
Theoretical and Applied Fracture Mechanics, Vol. 121
2021
-
Influence of non-homogeneous microstructure on hydrogen diffusion and trapping simulations near a crack tip in a welded joint
Theoretical and Applied Fracture Mechanics, Vol. 112
2020
-
Analysis of hydrogen permeation tests considering two different modelling approaches for grain boundary trapping in iron
International Journal of Fracture, Vol. 223, Núm. 1-2, pp. 17-35
-
Generalised boundary conditions for hydrogen transport at crack tips
Corrosion Science, Vol. 173
-
Influence of charging conditions on simulated temperature-programmed desorption for hydrogen in metals
International Journal of Hydrogen Energy, Vol. 45, Núm. 43, pp. 23704-23720
-
Simulation of hydrogen permeation through pure iron for trapping and surface phenomena characterisation
Theoretical and Applied Fracture Mechanics, Vol. 110
2019
-
Cold isostatic pressing to improve the mechanical performance of additively manufactured metallic components
Materials, Vol. 12, Núm. 15
-
Pre-notched dog bone small punch specimens for the estimation of fracture properties
Engineering Failure Analysis, Vol. 96, pp. 236-240
-
The Essential Work of Fracture parameters for 3D printed polymer sheets
Materials and Design, Vol. 181
2016
-
Damage modeling in Small Punch Test specimens
Theoretical and Applied Fracture Mechanics, Vol. 86, pp. 51-60