Publicaciones en las que colabora con Jesús Manuel Alegre Calderón (22)

2023

  1. Caracterización de la fragilización por hidrógeno mediante ensayos de fractura hidráulica a elevada presión interna en el acero 42CrMo4: efecto del tamaño de grano

    Revista española de mecánica de la fractura, Núm. 6, pp. 9-14

  2. Influence of hydrogen on the hydraulic fracture behavior of a 42CrMo4 steel welds: Effect of the prior austenite grain size

    Engineering Fracture Mechanics, Vol. 289

  3. Phase field modelling to predict hydrogen-assisted failures in elastic-plastic materials

    Revista española de mecánica de la fractura, Núm. 5, pp. 169-174

2022

  1. Efecto de los parámetros de precarga electroquímica de hidrógeno sobre la fractura hidraúlica en depósitos miniatura entallados

    Revista española de mecánica de la fractura, Núm. 3, pp. 51-56

  2. Hydraulic fracture behavior in the presence of hydrogen in notched miniature cylindrical specimens of a 42CrMo4 steel

    Engineering Fracture Mechanics, Vol. 274

  3. Notch fracture predictions using the Phase Field method for Ti-6Al-4V produced by Selective Laser Melting after different post-processing conditions

    Theoretical and Applied Fracture Mechanics, Vol. 121

2021

  1. Fracture toughness of coarse-grain heat affected zone of quenched and tempered CrMo steels with internal hydrogen: Fracture micromechanisms

    Engineering Fracture Mechanics, Vol. 241

  2. Influence of non-homogeneous microstructure on hydrogen diffusion and trapping simulations near a crack tip in a welded joint

    Theoretical and Applied Fracture Mechanics, Vol. 112

  3. TAFMEC special issue on hydrogen embrittlement of metallic materials: Fatigue and fracture

    Theoretical and Applied Fracture Mechanics

2020

  1. Analysis of hydrogen permeation tests considering two different modelling approaches for grain boundary trapping in iron

    International Journal of Fracture, Vol. 223, Núm. 1-2, pp. 17-35

  2. Influence of charging conditions on simulated temperature-programmed desorption for hydrogen in metals

    International Journal of Hydrogen Energy, Vol. 45, Núm. 43, pp. 23704-23720

  3. Influencia de los parámetros de proyección por plasma atmosférico (APS) en las propiedades mecánicas de recubrimientos de Ni-Al sobre sustrato de aleación de aluminio

    Anales de mecánica de la fractura, Núm. 37, pp. 221-227

  4. Simulation of hydrogen permeation through pure iron for trapping and surface phenomena characterisation

    Theoretical and Applied Fracture Mechanics, Vol. 110

2019

  1. Cold isostatic pressing to improve the mechanical performance of additively manufactured metallic components

    Materials, Vol. 12, Núm. 15

  2. Pre-notched dog bone small punch specimens for the estimation of fracture properties

    Engineering Failure Analysis, Vol. 96, pp. 236-240

  3. The Essential Work of Fracture parameters for 3D printed polymer sheets

    Materials and Design, Vol. 181

2016

  1. Damage modeling in Small Punch Test specimens

    Theoretical and Applied Fracture Mechanics, Vol. 86, pp. 51-60

  2. Determination of the creep crack initiation properties using pre-cracked small punch tests

    Theoretical and Applied Fracture Mechanics, Vol. 86, pp. 39-44

  3. Mechanical behavior and failure analysis of recycled polymers by use of miniature punch specimens

    Journal of Applied Polymer Science, Vol. 133, Núm. 4

2015

  1. Effect of confinement level on mechanical behaviour using the small punch test

    Engineering Failure Analysis, Vol. 58, pp. 206-211