Publicaciones (31) Publicaciones en las que ha participado algún/a investigador/a

2022

  1. A Review on the Synthesis and Current and Prospective Applications of Zirconium and Titanium Phosphates

    Eng, Vol. 3, Núm. 1, pp. 161-174

  2. A new hybrid HSDT for bending, free vibration, and buckling analysis of FGM plates (2D & quasi-3D)

    Smart Structures and Systems, Vol. 29, Núm. 3, pp. 395-420

  3. Adsorption of Heavy Metals Ions from Mining Metallurgical Tailings Leachate Using a Shell-Based Adsorbent: Characterization, Kinetics and Isotherm Studies

    Materials, Vol. 15, Núm. 15

  4. Análisis de la fragilización de un acero inoxidable dúplex en contacto con hidrógeno mediante ensayos de tracción con probetas lisas y entalladas

    Revista española de mecánica de la fractura, Núm. 4, pp. 71-76

  5. Caracterización micromecánica de ZAT de acero de alta resistencia en condiciones agresivas de hidrógeno

    Soldadura y tecnologías de unión, Año 32, Núm. 166, pp. 10-14

  6. Comparative study of embrittlement of quenched and tempered steels in hydrogen environments

    International Journal of Hydrogen Energy, Vol. 47, Núm. 38, pp. 17056-17068

  7. Comparison of hydrogen diffusivities measured by electrochemical permeation and temperature-programmed desorption in cold-rolled pure iron

    Journal of Natural Gas Science and Engineering, Vol. 98

  8. Critical hydrogen concentration for crack propagation in a CrMo steel: Targeted experiments for accurate numerical modelling

    Engineering Fracture Mechanics, Vol. 273

  9. Efecto de la fragilización inducida por hidrógeno interno en la velocidad de crecimiento de grieta por fatiga de la zona de grano grueso en una soldadura de acero 2.25Cr1Mo

    Revista española de mecánica de la fractura, Núm. 3, pp. 231-236

  10. Efecto de los parámetros de precarga electroquímica de hidrógeno sobre la fractura hidraúlica en depósitos miniatura entallados

    Revista española de mecánica de la fractura, Núm. 3, pp. 51-56

  11. Effect of HIP post-processing at 850 °C/200 MPa in the fatigue behavior of Ti-6Al-4V alloy fabricated by Selective Laser Melting

    International Journal of Fatigue, Vol. 163

  12. Effect of Internal Hydrogen on the Fatigue Crack Growth Rate in the Coarse-Grain Heat-Affected Zone of a CrMo Steel

    Metals, Vol. 12, Núm. 4

  13. Effect of green body density on the properties of graphite-molybdenum-titanium composite sintered by spark plasma sintering

    Journal of the European Ceramic Society, Vol. 42, Núm. 5, pp. 2048-2054

  14. Entangled core/shell magnetic structure driven by surface magnetic symmetry-breaking in Cr2O3nanoparticles

    Journal of Materials Chemistry C, Vol. 10, Núm. 5, pp. 1798-1807

  15. Estudio de la fragilización de un acero 42CrMo4 mediante ensayos SPT en ambiente de hidrógeno

    Revista española de mecánica de la fractura, Núm. 3, pp. 15-20

  16. Hydraulic fracture behavior in the presence of hydrogen in notched miniature cylindrical specimens of a 42CrMo4 steel

    Engineering Fracture Mechanics, Vol. 274

  17. Impact of COVID-19 restrictions on the dry deposition fraction of settleable particulate matter at three industrial urban/suburban locations in northern Spain

    Atmospheric Environment, Vol. 284

  18. Influence of tempering time on the fracture toughness of hydrogen pre-charged 42CrMo4 steel

    Theoretical and Applied Fracture Mechanics, Vol. 117

  19. Mathematical Approach for Mechanical Behaviour Analysis of FGM Plates on Elastic Foundation

    Mathematics, Vol. 10, Núm. 24

  20. MgO–ZrO2 Ceramic Composites for Silicomanganese Production

    Materials, Vol. 15, Núm. 7