Departamento
Ciencia de los Materiales e Ingeniería Metalúrgica
Publicaciones (26) Publicaciones en las que ha participado algún/a investigador/a
2012
-
A materials selection and design procedure for selection of automobile vehicles that are environmentally friendly in terms of available energy resources
Journal of Materials Education, Vol. 34, Núm. 1-2, pp. 1-20
-
Analysis of the influence of the temperature in the process of delamination under static and dynamic solicitation of an unidireccional carbon-epoxy composite
ICEM15: 15th International Conference on Experimental Mechanics
-
Analytical and Experimental Determination of the Fracture Toughness of Structural Steels Through Small Punch Test Specimens, Notched by Micromachining, Laser and Femtolaser Techniques
DETERMINATION OF MECHANICAL PROPERTIES OF MATERIALS BY SMALL PUNCH AND OTHER MINIATURE TESTING TECHNIQUES, 2ND INTERNATIONAL CONFERENCE SSTT
-
Analytical and experimental determination of the fracture toughness by means of small punch test specimens notched with a femtolaser
19th European Conference on Fracture: Fracture Mechanics for Durability, Reliability and Safety, ECF 2012
-
Análisis cuantitativo y caracterización morfológica de la aleación 6063. Diferencias microestructurales y mecánicas entre la superficie y el núcleo de barras cilíndricas de colada semicontinua
Revista de metalurgia, Vol. 48, Núm. 3, pp. 199-212
-
Application of the small punch test to determine the fracture toughness of metallic materials
Fatigue and Fracture of Engineering Materials and Structures, Vol. 35, Núm. 5, pp. 441-450
-
Caracterización físicoquímica de acreciones presentes en un horno de lecho fluidizado para la tostación de blenda
DYNA: revista de la Facultad de Minas. Universidad Nacional de Colombia. Sede Medellín, Vol. 79, Núm. 175, pp. 90-96
-
Effect of constraint on the fracture behaviour of a simulated heat-affected zone of an X-70 steel used in pipelines
Strain, Vol. 48, Núm. 2, pp. 157-161
-
FINITE ELEMENT MODELS FOR THE ONSET AND GROWTH OF DELAMINATION IN CFRP LAMINATES
ICEM15: 15TH INTERNATIONAL CONFERENCE ON EXPERIMENTAL MECHANICS
-
Fatigue behaviour of young ostrich pericardium
Materials Science and Engineering C, Vol. 32, Núm. 6, pp. 1415-1420
-
Finite element modelling of mode i delamination specimens by means of implicit and explicit solvers
Polymer Testing, Vol. 31, Núm. 3, pp. 404-410
-
Fracture Characterization of Steels by Means of Un-Notched and Notched Small Punch Test Samples
Determination of mechanical properties of materials by small punch and other miniature testing techniques, 2nd International Conference SSTT
-
Influence of intermediate postweld heat treatments on the fracture toughness of CrMoV steel welds
19th European Conference on Fracture: Fracture Mechanics for Durability, Reliability and Safety, ECF 2012
-
Influence of intermediate postweld heat treatments on the fracture toughness of CrMoV steel welds
19th European Conference on Fracture: Fracture Mechanics for Durability, Reliability and Safety, ECF 2012
-
Influence of temperature on a carbon-fibre epoxy composite subjected to static and fatigue loading under mode-I delamination
International Journal of Solids and Structures, Vol. 49, Núm. 21, pp. 2934-2940
-
Influence of the crack plane asymmetry over G II results in carbon epoxy ENF specimens
Composite Structures, Vol. 94, Núm. 3, pp. 1187-1191
-
Influence of the principal tensile stresses on delamination fracture mechanisms and their associated morphology for different loading modes in carbon/epoxy composites
Composites Part B: Engineering, Vol. 43, Núm. 3, pp. 1676-1680
-
Lanthanide phosphonates: Synthesis, thermal stability and magnetic characterization
Journal of Alloys and Compounds
-
New techniques to detect the suitable time to close the tap hole of a blast furnace
Steel Research International, Vol. 83, Núm. 8, pp. 783-790
-
Numerical analysis of delamination growth in composite materials using Two Step Extension and Cohesive Zone methods
ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials