Ciencia de los Materiales e Ingeniería Metalúrgica
Departamento
Isidoro Iván
Cuesta Segura
Publicaciones en las que colabora con Isidoro Iván Cuesta Segura (23)
2024
-
Effect of electrochemical charging on the hydrogen embrittlement susceptibility of a low-alloyed tempered martensitic steel submitted to high internal pressure
International Journal of Hydrogen Energy, Vol. 63, pp. 657-667
-
Evaluating hydrogen embrittlement susceptibility of a 2205 DSS
Procedia Structural Integrity
-
Hydrogen Embrittlement of AISI 316L steel produced by Selective Laser Melting
Procedia Structural Integrity
2023
-
Caracterización de la fragilización por hidrógeno mediante ensayos de fractura hidráulica a elevada presión interna en el acero 42CrMo4: efecto del tamaño de grano
Revista española de mecánica de la fractura, Núm. 6, pp. 9-14
-
Comparative study of reference and additively manufactured 316L stainless steel: effect of conventional and severe shot peening treatments on microstructure and mechanical features
Revista española de mecánica de la fractura, Núm. 5, pp. 269-274
-
Comportamiento en fatiga de una aleación de Ti-6Al-4V fabricada mediante Binder Jetting
Revista española de mecánica de la fractura, Núm. 5, pp. 275-280
-
Efecto del tratamiento térmico post-soldadura en la fragilización por hidrógeno de uniones soldadas de acero CrMoV mediante el uso del ensayo small punch
Revista española de mecánica de la fractura, Núm. 6, pp. 55-60
-
Hydrogen uptake and diffusion kinetics in a quenched and tempered low carbon steel: experimental and numerical study
International Journal of Hydrogen Energy, Vol. 48, Núm. 90, pp. 35347-35365
-
Influence of hydrogen on the hydraulic fracture behavior of a 42CrMo4 steel welds: Effect of the prior austenite grain size
Engineering Fracture Mechanics, Vol. 289
-
Phase field modelling to predict hydrogen-assisted failures in elastic-plastic materials
Revista española de mecánica de la fractura, Núm. 5, pp. 169-174
2022
-
Efecto de los parámetros de precarga electroquímica de hidrógeno sobre la fractura hidraúlica en depósitos miniatura entallados
Revista española de mecánica de la fractura, Núm. 3, pp. 51-56
-
Effect of HIP post-processing at 850 °C/200 MPa in the fatigue behavior of Ti-6Al-4V alloy fabricated by Selective Laser Melting
International Journal of Fatigue, Vol. 163
-
Estudio de la fragilización de un acero 42CrMo4 mediante ensayos SPT en ambiente de hidrógeno
Revista española de mecánica de la fractura, Núm. 3, pp. 15-20
-
Hydraulic fracture behavior in the presence of hydrogen in notched miniature cylindrical specimens of a 42CrMo4 steel
Engineering Fracture Mechanics, Vol. 274
-
Parameter Optimisation in Selective Laser Melting on C300 Steel
Applied Sciences (Switzerland), Vol. 12, Núm. 19
2020
-
SPT analysis of hydrogen embrittlement in CrMoV welds
Theoretical and Applied Fracture Mechanics, Vol. 110
-
Simulation of hydrogen permeation through pure iron for trapping and surface phenomena characterisation
Theoretical and Applied Fracture Mechanics, Vol. 110
2016
-
Application of the miniature small punch test for the mechanical characterization of polymer materials
Theoretical and Applied Fracture Mechanics, Vol. 86, pp. 78-83
-
Determination of the creep crack initiation properties using pre-cracked small punch tests
Theoretical and Applied Fracture Mechanics, Vol. 86, pp. 39-44
-
Effect of hydrogen embrittlement on the tensile properties of CrMoV steels by means of the small punch test
Materials Science and Engineering A, Vol. 664, pp. 165-176