Publicaciones en las que colabora con ALFONSO CARLOS FERNANDEZ CANTELI (28)

2017

  1. Crack growth rate curves of hydrogen embrittled steels. Fatigue frequency and concentration influence

    ICF 2017 - 14th International Conference on Fracture

  2. Mechanical fatigue of metals

    Engineering Fracture Mechanics

2016

  1. Editorial of the ICMFM Conference

    Procedia Engineering

2015

  1. Influence of temperature on the delamination process under mode i fracture and dynamic loading of two carbon-epoxy composites

    Composites Part B: Engineering, Vol. 68, pp. 207-214

2014

  1. Influence of the temperature in the delamination under mode I of fracture and dynamic loading of two carbon-epoxy composites

    16th European Conference on Composite Materials, ECCM 2014

2013

  1. Comparación entre el comportamiento mecánico a tracción, fractura y fatiga de armaduras de refuerzo fabricadas con distintos tipos de acero

    Materiales de construcción, Vol. 63, Núm. 311, pp. 433-447

  2. Using a statistical model for the analysis of the influence of the type of matrix carbon-epoxy composites on the fatigue delamination under modes i and II of fracture

    International Journal of Fatigue, Vol. 56, pp. 54-59

2012

  1. Influence of the principal tensile stresses on delamination fracture mechanisms and their associated morphology for different loading modes in carbon/epoxy composites

    Composites Part B: Engineering, Vol. 43, Núm. 3, pp. 1676-1680

2011

  1. Influence of resin type on the delamination behavior of carbon fiber reinforced composites under mode-II loading

    International Journal of Damage Mechanics, Vol. 20, Núm. 7, pp. 963-978

  2. Influence of temperature on the fatigue behaviour of glass fibre reinforced polypropylene

    Strain, Vol. 47, Núm. 3, pp. 222-226

  3. Influence of the Matrix Type on the Mode I Fracture of Carbon-Epoxy Composites Under Dynamic Delamination

    Experimental Mechanics, Vol. 51, Núm. 3, pp. 293-301

  4. Influence of the matrix constituent on mode i and mode II delamination toughness in fiber-reinforced polymer composites under cyclic fatigue

    Mechanics of Materials, Vol. 43, Núm. 1, pp. 62-67

2010

  1. Fatigue delamination, initiation, and growth, under mode I and II of fracture in a carbon-fiber epoxy composite

    Polymer Composites, Vol. 31, Núm. 4, pp. 700-706

  2. The influence of shot peening on the fatigue behaviour of duplex stainless steels

    Procedia Engineering

2009

  1. Fatigue behaviour of duplex stainless steel reinforcing bars subjected to shot peening

    Fatigue and Fracture of Engineering Materials and Structures, Vol. 32, Núm. 7, pp. 567-572

2008

  1. Interlaminar crack initiation and growth rate in a carbon-fibre epoxy composite under mode-I fatigue loading

    Composites Science and Technology, Vol. 68, Núm. 12, pp. 2325-2331

2007

  1. Evolution of the impact strength of carbon fiber-reinforced PEI following exposure to mechanical, hygrothermal and hygrothermomechanical aging

    Journal of Composite Materials, Vol. 41, Núm. 19, pp. 2337-2346

  2. Fatigue behaviour of hot rolled reinforcing bars of austenitic and duplex stainless steels

    Materials Science and Technology, Vol. 23, Núm. 2, pp. 145-150

  3. Influence of the shot peening process on the fatigue behaviour of duplex stainless steel reinforcing bars

    Materials Science Forum

2006

  1. Influencia del coeficiente de asimetría en la formación y crecimiento de grietas interlaminares en un material compuesto sometido a fatiga

    Revista de plásticos modernos: Ciencia y tecnología de polímeros, Núm. 605, pp. 437-440