Publicacions (25) Publicacions de ALEJANDRO GONZALEZ POCIÑO

2024

  1. Effect of Shot Peening and Nitriding on Toughness and Abrasive Wear Resistance of Powder Metallurgic Steels Highly Alloyed with Vanadium

    Metals, Vol. 14, Núm. 1

  2. Effects of Nitriding and Thermal Processing on Wear and Corrosion Resistance of Vanadis 8 Steel

    Coatings, Vol. 14, Núm. 8

2023

  1. Analysis of a Double Aging Process in a Maraging 300 Steel Fabricated by Selective Laser Melting, Using the Design of Experiments Technique

    Metals, Vol. 13, Núm. 10

  2. Optimización del tratamiento térmico en aceros maraging fabricados sin cobalto y sin molibdeno mediante “selective laser melting” (SLM)

    Revista española de mecánica de la fractura, Núm. 6, pp. 61-66

  3. The Effect of Selective Laser Melting Fabrication Parameters on the Tensile Strength of an Aged New Maraging Steel Alloy with 8% Cr, Reduced Ni Content (7%), and No Co or Mo

    Materials, Vol. 16, Núm. 21

2022

  1. Optimisation of Thermal Processes with Plasma Nitriding on Vanadis 4 High Speed Steel

    Materials, Vol. 15, Núm. 3

2021

  1. Decrease in electrical resistivity below 28 nΩm by aging in hyperperitectic al‐zr alloys treated at high temperatures

    Metals, Vol. 11, Núm. 8

  2. Evaluation of hardness, sliding wear and strength of a hypoeutectic white iron with 25%cr after heat treatments

    Metals, Vol. 11, Núm. 6

  3. How to avoid the detachment of threads of varnish during production, through cutting and drawing, in the manufacture of lids with a ‘twist-off’ mechanism used for the closure of glass containers

    Materials, Vol. 14, Núm. 18

  4. Improvement of impact toughness and abrasion resistance of a 3c‐25cr‐0.5mo alloy using a design of experiment statistical technique: Microstructural correlations after heat treatments

    Metals, Vol. 11, Núm. 4

  5. The joint effects of nitriding and parameters related to the destabilisation of austenite on wear resistance in white cast iron with 25% cr

    Metals, Vol. 11, Núm. 1, pp. 1-12

2020

  1. Analysis of different solution treatments in the transformation of β-alfesi particles into α-(Femn)si and their influence on different ageing treatments in al–mg–si alloys

    Metals, Vol. 10, Núm. 5

  2. Influence of thermal processing factors, linked to the destabilisation of austenite, on the microstructural variation of a white cast iron containing 25% Cr and 0.6% Mo

    Metals, Vol. 10, Núm. 6, pp. 1-14

  3. Optimización de los parámetros de temple y revenido para la precipitación de carburos secundarios del tipo M7C3 y MC, eliminación de la austenita retenida y mejora de la resistencia al desgaste abrasivo en el acero de herramientas Vanadis 10

    TRATERMAT 2019: XVI Congreso Internacional de Tratamientos Térmicos y de Superficie

  4. Optimización de procesos térmicos para incrementar la resistencia al desgaste erosivo en fundiciones blancas hipoeutécticas altamente aleadas

    TRATERMAT 2019: XVI Congreso Internacional de Tratamientos Térmicos y de Superficie

  5. Optimization of thermal processes applied to hypoeutectic white cast iron containing 25% Cr aimed at increasing erosive wear resistance

    Metals, Vol. 10, Núm. 3

2019

  1. A trade-off between mechanical strength and erosive wear resistance in alsi12cumgni alloy used to manufacture fan blades for underground mines

    Metals, Vol. 9, Núm. 3

  2. Erosive wear resistance regarding different destabilization heat treatments of austenite in high chromium white cast iron, alloyed with mo

    Metals, Vol. 9, Núm. 5

  3. Improvement of adhesive wear behavior by variable heat treatment of a tool steel for sheet metal forming

    Materials, Vol. 12, Núm. 7

  4. In-service microstructural modifications caused by fatigue phenomena leading to the failure of a high-voltage cable

    Praktische Metallographie/Practical Metallography, Vol. 56, Núm. 5, pp. 288-302