JOSE CARLOS RICO FERNANDEZ-rekin lankidetzan egindako argitalpenak (31)

2024

  1. A layerwise geometric error compensation procedure for additive manufacturing

    Rapid Prototyping Journal, Vol. 30, Núm. 3, pp. 490-501

2023

  1. Virtual-point-based geometric error compensation model for additive manufacturing machines

    Rapid Prototyping Journal, Vol. 29, Núm. 4, pp. 837-849

2016

  1. Measurement and correction of the slope angle of flat surfaces digitized by a conoscopic holography system

    Precision Engineering, Vol. 46, pp. 369-376

2015

  1. Adjustment recommendations of a conoscopic holography sensor for a reliable scanning of surfaces with roughness grades obtained by different processes

    Precision Engineering, Vol. 42, pp. 335-345

  2. Influence of Surface Location within Depth of Field on Measuring by a Conoscopic Holography Sensor Integrated in a Machining Centre

    Procedia Engineering

  3. Influence of part material and sensor adjustment on the quality of digitised point-clouds using conoscopic holography

    Precision Engineering, Vol. 42, pp. 42-52

2014

  1. Influence of surface position along the working range of conoscopic holography sensors on dimensional verification of AISI 316 wire EDM machined surfaces

    Sensors (Switzerland), Vol. 14, Núm. 3, pp. 4495-4512

  2. Non-contact measurement of surface roughness by Conoscopic uolography systems

    Lecture Notes in Engineering and Computer Science

2008

  1. Accessibility analysis for automatic inspection in CMMs by using bounding volume hierarchies

    International Journal of Production Research, Vol. 46, Núm. 20, pp. 5797-5826

  2. Laser scan planning based on visibility analysis and space partitioning techniques

    International Journal of Advanced Manufacturing Technology, Vol. 39, Núm. 7-8, pp. 699-715

2007

  1. Methodology for set-up planning automation of turned parts

    International Journal of Production Research, Vol. 45, Núm. 17, pp. 3917-3947

2006

  1. Accessibility analysis for automatic inspection using bounding volume hierarchies

    IEEE International Conference on Emerging Technologies and Factory Automation, ETFA

2003

  1. Automatic determination of bending sequences for sheet metal parts with parallel bends

    International Journal of Production Research, Vol. 41, Núm. 14, pp. 3273-3299

2002

  1. Accessibility analysis for star probes in automatic inspection of rotational parts

    International Journal of Production Research, Vol. 40, Núm. 6, pp. 1493-1523

  2. Factores de influencia en la obtención de las secuencias de plegado para piezas de chapa

    Deformación metálica: Técnicas de fabricación, acabado y transformación del fleje, chapa, tubos y alambre, Año 28, Núm. 263, pp. 58-63

2001

  1. Integración de la gestión de herramientas en un sistema CAM de punzonado

    Deformación metálica: Técnicas de fabricación, acabado y transformación del fleje, chapa, tubos y alambre, Año 27, Núm. 256, pp. 22-27

  2. Planificación automática de procesos para piezas de revolución

    V Congreso Iberoamericano de Ingeniería Mecánica

2000

  1. Automatic selection of clamping surfaces in the turning process for rotational parts

    Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 214, Núm. 8, pp. 693-708

  2. Sistema CAPP para piezas de revolución

    IMHE: Información de máquinas-herramienta, equipos y accesorios, Núm. 263, pp. 107-114

1998

  1. Design of special tools by CAD/CAM systems

    Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 212, Núm. 5, pp. 357-371