Publicaciones (37) Publicaciones de MARIA VICTORIA MOLLON SANCHEZ

2022

  1. Study of the Influence of the Type of Aging on the Behavior of Delamination of Adhesive Joints in Carbon-Fiber-Reinforced Epoxy Composites

    Materials, Vol. 15, Núm. 10

2020

  1. Finite element analysis of the Longitudinal Half Fixed Beam method for mode III characterization

    Composite Structures, Vol. 232

  2. Mechanical properties of fibreglass and carbon-fibre reinforced polyetherimide after twenty years of outdoor environmental aging in the city of Gijón (Spain)

    Composites Communications, Vol. 22

  3. Symmetric and asymmetric dynamic characterization of mode-III fracture in epoxy/unidirectional carbon-fibre composites

    Fatigue and Fracture of Engineering Materials and Structures, Vol. 43, Núm. 3, pp. 457-465

2019

  1. Use of a LHFB device for testing mode III in a composite laminate

    Polymers, Vol. 11, Núm. 8

2018

  1. La redacción de informes técnicos y periciales como formación transversal en ingeniería

    XXVI Congreso Universitario de Innovación Educativa en las Enseñanzas Técnicas: libro de actas

2017

  1. A study of the effects of the matrix epoxy resin and graphene oxide (GO) manufacturing process on the tensile behaviour of GO-epoxy nanocomposites

    Plastics, Rubber and Composites, Vol. 46, Núm. 9, pp. 405-412

  2. Proposals to improve the durability assessment after ageing tests for wood-based sandwich panels

    Journal of Sandwich Structures and Materials, Vol. 19, Núm. 2, pp. 216-230

  3. Uso de modelos de elementos finitos para simular procesos físicos en ingeniería mecánica y ciencia de materiales

    Nuevos modelos de investigación y colaboración en Ingeniería Gráfica: actas del Congreso Internacional INGEGRAF

2016

  1. A new method for testing composite materials under mode III fracture

    Journal of Composite Materials, Vol. 50, Núm. 28, pp. 3973-3980

  2. Improvements to the procedure for flexural testing, on two spans, of full wood-based sandwich panel subject to uniform load

    Construction and Building Materials, Vol. 102, pp. 281-296

2015

  1. A method to determine the rolling resistance coefficient by means of uniaxial testing machines

    Experimental Techniques, Vol. 39, Núm. 3, pp. 37-41

  2. Analytical and numerical approach of an End Notched Flexure test configuration with an inserted roller for promoting mixed mode I/II

    Engineering Fracture Mechanics, Vol. 143, pp. 63-79

  3. Influence of temperature on the delamination process under mode i fracture and dynamic loading of two carbon-epoxy composites

    Composites Part B: Engineering, Vol. 68, pp. 207-214

  4. Influence on the delamination phenomenon of matrix type and thermal variations in unidirectional carbon-fiber epoxy composites

    Polymer Composites, Vol. 36, Núm. 4, pp. 747-755

2014

  1. A new methology for testing composite materials in mode III of fracture

    16th European Conference on Composite Materials, ECCM 2014

  2. Durabilidad y ensayos de envejecimiento acelerado en productos de construcción

    Revista DYNA, Vol. 89, Núm. 2, pp. 176-182

  3. Influence of the loading system on mode I delamination results in carbon-epoxy composites

    Experimental Techniques, Vol. 38, Núm. 1, pp. 53-58

  4. Influence of the temperature in the delamination under mode I of fracture and dynamic loading of two carbon-epoxy composites

    16th European Conference on Composite Materials, ECCM 2014

2013

  1. Fracture and Failure Mechanisms for Different Loading Modes in Unidirectional Carbon Fibre/Epoxy Composites

    Advanced Composite Materials for Automotive Applications: Structural Integrity and Crashworthiness (wiley), pp. 229-255