Publicaciones en las que colabora con JAIME AURELIO VIÑA OLAY (29)

2022

  1. Study of the Influence of the Type of Aging on the Behavior of Delamination of Adhesive Joints in Carbon-Fiber-Reinforced Epoxy Composites

    Materials, Vol. 15, Núm. 10

2020

  1. Finite element analysis of the Longitudinal Half Fixed Beam method for mode III characterization

    Composite Structures, Vol. 232

  2. Mechanical properties of fibreglass and carbon-fibre reinforced polyetherimide after twenty years of outdoor environmental aging in the city of Gijón (Spain)

    Composites Communications, Vol. 22

  3. Symmetric and asymmetric dynamic characterization of mode-III fracture in epoxy/unidirectional carbon-fibre composites

    Fatigue and Fracture of Engineering Materials and Structures, Vol. 43, Núm. 3, pp. 457-465

2019

  1. Use of a LHFB device for testing mode III in a composite laminate

    Polymers, Vol. 11, Núm. 8

2017

  1. A study of the effects of the matrix epoxy resin and graphene oxide (GO) manufacturing process on the tensile behaviour of GO-epoxy nanocomposites

    Plastics, Rubber and Composites, Vol. 46, Núm. 9, pp. 405-412

2016

  1. A new method for testing composite materials under mode III fracture

    Journal of Composite Materials, Vol. 50, Núm. 28, pp. 3973-3980

2015

  1. Influence of temperature on the delamination process under mode i fracture and dynamic loading of two carbon-epoxy composites

    Composites Part B: Engineering, Vol. 68, pp. 207-214

  2. Influence on the delamination phenomenon of matrix type and thermal variations in unidirectional carbon-fiber epoxy composites

    Polymer Composites, Vol. 36, Núm. 4, pp. 747-755

2014

  1. A new methology for testing composite materials in mode III of fracture

    16th European Conference on Composite Materials, ECCM 2014

  2. Influence of the loading system on mode I delamination results in carbon-epoxy composites

    Experimental Techniques, Vol. 38, Núm. 1, pp. 53-58

  3. Influence of the temperature in the delamination under mode I of fracture and dynamic loading of two carbon-epoxy composites

    16th European Conference on Composite Materials, ECCM 2014

2013

  1. Influence of the matrix toughness in carbon-epoxy composites subjected to delamination under modes i, ii, and mixed I/II

    Mechanics of Advanced Materials and Structures, Vol. 20, Núm. 8, pp. 679-686

2012

  1. Analysis of the influence of the temperature in the process of delamination under static and dynamic solicitation of an unidireccional carbon-epoxy composite

    ICEM15: 15th International Conference on Experimental Mechanics

  2. FINITE ELEMENT MODELS FOR THE ONSET AND GROWTH OF DELAMINATION IN CFRP LAMINATES

    ICEM15: 15TH INTERNATIONAL CONFERENCE ON EXPERIMENTAL MECHANICS

  3. Finite element modelling of mode i delamination specimens by means of implicit and explicit solvers

    Polymer Testing, Vol. 31, Núm. 3, pp. 404-410

  4. Influence of temperature on a carbon-fibre epoxy composite subjected to static and fatigue loading under mode-I delamination

    International Journal of Solids and Structures, Vol. 49, Núm. 21, pp. 2934-2940

  5. Influence of the crack plane asymmetry over G II results in carbon epoxy ENF specimens

    Composite Structures, Vol. 94, Núm. 3, pp. 1187-1191

  6. Influence of the principal tensile stresses on delamination fracture mechanisms and their associated morphology for different loading modes in carbon/epoxy composites

    Composites Part B: Engineering, Vol. 43, Núm. 3, pp. 1676-1680

  7. Numerical analysis of delamination growth in composite materials using Two Step Extension and Cohesive Zone methods

    ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials