Publikationen (76) Publikationen von JUAN ASENSIO LOZANO

2024

  1. Analysis of the Mechanical Properties of Structural Ceramics Made from Aggregate Washing Sludge and Manganese Mining Waste

    Materials, Vol. 17, Núm. 17

2021

  1. Evaluation of hardness, sliding wear and strength of a hypoeutectic white iron with 25%cr after heat treatments

    Metals, Vol. 11, Núm. 6

  2. Improvement of impact toughness and abrasion resistance of a 3c‐25cr‐0.5mo alloy using a design of experiment statistical technique: Microstructural correlations after heat treatments

    Metals, Vol. 11, Núm. 4

  3. The joint effects of nitriding and parameters related to the destabilisation of austenite on wear resistance in white cast iron with 25% cr

    Metals, Vol. 11, Núm. 1, pp. 1-12

2020

  1. Analysis of different solution treatments in the transformation of β-alfesi particles into α-(Femn)si and their influence on different ageing treatments in al–mg–si alloys

    Metals, Vol. 10, Núm. 5

  2. Influence of thermal processing factors, linked to the destabilisation of austenite, on the microstructural variation of a white cast iron containing 25% Cr and 0.6% Mo

    Metals, Vol. 10, Núm. 6, pp. 1-14

  3. Optimización de la unión entre capa de trabajo y núcleo en cilindros de laminación dúplex, fabricados mediante colada centrífuga y empleados en el tren de bandas en caliente

    TRATERMAT 2019: XVI Congreso Internacional de Tratamientos Térmicos y de Superficie

  4. Optimización de los parámetros de temple y revenido para la precipitación de carburos secundarios del tipo M7C3 y MC, eliminación de la austenita retenida y mejora de la resistencia al desgaste abrasivo en el acero de herramientas Vanadis 10

    TRATERMAT 2019: XVI Congreso Internacional de Tratamientos Térmicos y de Superficie

  5. Optimización de procesos térmicos para incrementar la resistencia al desgaste erosivo en fundiciones blancas hipoeutécticas altamente aleadas

    TRATERMAT 2019: XVI Congreso Internacional de Tratamientos Térmicos y de Superficie

  6. Optimización del tratamiento térmico en aleaciones Al-Si-Cu-Mg, con o sin deformación previa

    TRATERMAT 2019: XVI Congreso Internacional de Tratamientos Térmicos y de Superficie

  7. Optimization of thermal processes applied to hypoeutectic white cast iron containing 25% Cr aimed at increasing erosive wear resistance

    Metals, Vol. 10, Núm. 3

2019

  1. A trade-off between mechanical strength and erosive wear resistance in alsi12cumgni alloy used to manufacture fan blades for underground mines

    Metals, Vol. 9, Núm. 3

  2. Control over the percentage, shape and size of the graphite particles in martensitic white castings alloyed with Cr, Nb and Mg

    Materials, Vol. 12, Núm. 1

  3. Enhancement of the quality of the shell-core bond interface in duplexwork rolls manufactured by centrifugal casting used in hot strip mills

    Materials, Vol. 12, Núm. 8

  4. Erosive wear resistance regarding different destabilization heat treatments of austenite in high chromium white cast iron, alloyed with mo

    Metals, Vol. 9, Núm. 5

  5. Improvement of adhesive wear behavior by variable heat treatment of a tool steel for sheet metal forming

    Materials, Vol. 12, Núm. 7

  6. In-service microstructural modifications caused by fatigue phenomena leading to the failure of a high-voltage cable

    Praktische Metallographie/Practical Metallography, Vol. 56, Núm. 5, pp. 288-302

  7. Influence of thermal parameters related to destabilization treatments on erosive wear resistance and microstructural variation of white cast iron containing 18% Cr. application of design of experiments and rietveld structural analysis

    Materials, Vol. 12, Núm. 19

  8. Optimization of quenching and tempering parameters for the precipitation of M7C3 and mc secondary carbides and the removal of the austenite retained in vanadis 10 tool steel

    Metals, Vol. 9, Núm. 6

  9. Optimization, by means of a design of experiments, of heat processes to increase the erosive wear resistance of white hypoeutectic cast irons alloyed with cr and mo.

    Metals, Vol. 9, Núm. 4