Publications (167) FERNANDO VALERIANO DIEZ SANZ publications

filter_list

2022

  1. Assessment of an integrated adsorption-regenerative catalytic oxidation process for the harnessing of lean methane emissions

    Journal of Environmental Chemical Engineering, Vol. 10, Núm. 1

2020

  1. Control of regenerative catalytic oxidizers used in coal mine ventilation air methane exploitation

    Process Safety and Environmental Protection, Vol. 134, pp. 333-342

2019

  1. Reverse flow reactors as sustainable devices for performing exothermic reactions: Applications and engineering aspects

    Chemical Engineering and Processing - Process Intensification, Vol. 135, pp. 175-189

2018

  1. Direct synthesis of dimethyl ether in multi-tubular fixed-bed reactors: 2D multi-scale modelling and optimum design

    Fuel Processing Technology, Vol. 174, pp. 149-157

2017

  1. Assessment of phenol wet oxidation on CuO/γ-Al2O3 catalysts: Competition between heterogeneous and leached-copper homogeneous reaction paths

    Journal of Environmental Chemical Engineering, Vol. 5, Núm. 3, pp. 2570-2578

  2. Open-cell foams as beds in multiphase reactors: Residence time distribution and mass transfer

    Chemical Engineering Journal, Vol. 316, pp. 323-331

  3. Performance of a cell-foam trickle-bed reactor for phenol wet oxidation: Influence of operation parameters and modelling

    Process Safety and Environmental Protection, Vol. 107, pp. 35-43

2016

  1. Catalytic combustion of sulphur-containing methane lean emissions in a reverse-flow reactor with integrated adsorption

    Chemical Engineering Journal, Vol. 285, pp. 39-48

  2. Combustion of coal mine ventilation air methane in a regenerative combustor with integrated adsorption: Reactor design and optimization

    Applied Thermal Engineering, Vol. 102, pp. 167-175

  3. Gas-Phase Hydrodeoxygenation of Benzaldehyde, Benzyl Alcohol, Phenyl Acetate, and Anisole over Precious Metal Catalysts

    Industrial and Engineering Chemistry Research, Vol. 55, Núm. 8, pp. 2319-2327

  4. Liquid hold-up and gas-liquid mass transfer in an alumina open-cell foam

    Chemical Engineering Science, Vol. 143, pp. 297-304

  5. Performance of ceramic foams as gas–liquid contactors for phenol wet oxidation in the trickle regime

    Catalysis Today, Vol. 273, pp. 172-177

  6. Transition metal oxide catalysts as an alternative for the oxidation of nitrogen monoxide to nitrogen dioxide: Kinetic modelling at high space velocity

    Journal of Chemical Technology and Biotechnology, Vol. 91, Núm. 2, pp. 359-366

2015

  1. Coal mine ventilation air methane combustion in a catalytic reverse flow reactor: Influence of emission humidity

    Fuel Processing Technology, Vol. 133, pp. 202-209

  2. Experimental demonstration and modeling of an adsorption-enhanced reverse flow reactor for the catalytic combustion of coal mine ventilation air methane

    Chemical Engineering Journal, Vol. 279, pp. 198-206

  3. Hydrodeoxygenation of Acetophenone over Supported Precious Metal Catalysts at Mild Conditions: Process Optimization and Reaction Kinetics

    Energy and Fuels, Vol. 29, Núm. 12, pp. 8208-8215

  4. Influence of operation conditions on the copper-catalysed homogeneous wet oxidation of phenol: Development of a kinetic model

    Chemical Engineering Journal, Vol. 270, pp. 122-132

  5. Selective catalytic reduction of NO in a reverse-flow reactor: Modelling and experimental validation

    Applied Energy, Vol. 138, pp. 183-192

  6. The role of reaction kinetics and mass transfer in the selective catalytic reduction of NO with NH3 in monolithic reactors

    Journal of Chemical Technology and Biotechnology, Vol. 90, Núm. 7, pp. 1299-1307

2014

  1. A new method for controlling the ignition state of a regenerative combustor using a heat storage device

    Applied Energy, Vol. 116, pp. 322-332