Publicaciones en las que colabora con ANTONIO ARGUELLES AMADO (36)

2022

  1. Study of the Influence of the Type of Aging on the Behavior of Delamination of Adhesive Joints in Carbon-Fiber-Reinforced Epoxy Composites

    Materials, Vol. 15, Núm. 10

2020

  1. Finite element analysis of the Longitudinal Half Fixed Beam method for mode III characterization

    Composite Structures, Vol. 232

  2. Mechanical properties of fibreglass and carbon-fibre reinforced polyetherimide after twenty years of outdoor environmental aging in the city of Gijón (Spain)

    Composites Communications, Vol. 22

  3. Symmetric and asymmetric dynamic characterization of mode-III fracture in epoxy/unidirectional carbon-fibre composites

    Fatigue and Fracture of Engineering Materials and Structures, Vol. 43, Núm. 3, pp. 457-465

2019

  1. Use of a LHFB device for testing mode III in a composite laminate

    Polymers, Vol. 11, Núm. 8

2017

  1. A study of the effects of the matrix epoxy resin and graphene oxide (GO) manufacturing process on the tensile behaviour of GO-epoxy nanocomposites

    Plastics, Rubber and Composites, Vol. 46, Núm. 9, pp. 405-412

2016

  1. Fracture behavior under mixed mode I/II static and dynamic loading of ADCB specimens

    Journal of Reinforced Plastics and Composites, Vol. 35, Núm. 20, pp. 1513-1523

2015

  1. Influence on the delamination phenomenon of matrix type and thermal variations in unidirectional carbon-fiber epoxy composites

    Polymer Composites, Vol. 36, Núm. 4, pp. 747-755

2014

  1. A new methology for testing composite materials in mode III of fracture

    16th European Conference on Composite Materials, ECCM 2014

  2. Influence of the loading system on mode I delamination results in carbon-epoxy composites

    Experimental Techniques, Vol. 38, Núm. 1, pp. 53-58

2013

  1. Fracture and Failure Mechanisms for Different Loading Modes in Unidirectional Carbon Fibre/Epoxy Composites

    Advanced Composite Materials for Automotive Applications: Structural Integrity and Crashworthiness (wiley), pp. 229-255

  2. Influence of the matrix toughness in carbon-epoxy composites subjected to delamination under modes i, ii, and mixed I/II

    Mechanics of Advanced Materials and Structures, Vol. 20, Núm. 8, pp. 679-686

  3. Using a statistical model for the analysis of the influence of the type of matrix carbon-epoxy composites on the fatigue delamination under modes i and II of fracture

    International Journal of Fatigue, Vol. 56, pp. 54-59

2012

  1. FINITE ELEMENT MODELS FOR THE ONSET AND GROWTH OF DELAMINATION IN CFRP LAMINATES

    ICEM15: 15TH INTERNATIONAL CONFERENCE ON EXPERIMENTAL MECHANICS

  2. Finite element modelling of mode i delamination specimens by means of implicit and explicit solvers

    Polymer Testing, Vol. 31, Núm. 3, pp. 404-410

  3. Influence of the crack plane asymmetry over G II results in carbon epoxy ENF specimens

    Composite Structures, Vol. 94, Núm. 3, pp. 1187-1191

  4. Influence of the principal tensile stresses on delamination fracture mechanisms and their associated morphology for different loading modes in carbon/epoxy composites

    Composites Part B: Engineering, Vol. 43, Núm. 3, pp. 1676-1680

  5. Numerical analysis of delamination growth in composite materials using Two Step Extension and Cohesive Zone methods

    ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials

2011

  1. Estudio de las tensiones principales en el frente de grieta y su influencia en los mecanismos del fallo por deslaminación en materiales compuestos CFRP

    Actas del IX Congreso Nacional de Materiales Compuestos: Girona, 5, 6, 7 y 8 de julio de 2011

  2. Evaluación de la tasa de relajación crítica de energía en probetas con grieta asimétrica en modo II

    Actas del IX Congreso Nacional de Materiales Compuestos: Girona, 5, 6, 7 y 8 de julio de 2011