Construcción e Ingeniería de Fabricación

2015

1. A correction factor to approximate the design thermal conductivity of building materials. Application to Spanish façades

   Energy and Buildings, Vol. 88, pp. 153-164

2. A graphical method to assist quality decisions throughout the product development process

   Quality control and applied statistics, Vol. 60, Núm. 4, pp. 397-400

3. A method to determine the rolling resistance coefficient by means of uniaxial testing machines

   Experimental Techniques, Vol. 39, Núm. 3, pp. 37-41

4. A proposed wave farm on the Galician coast

   Energy Conversion and Management, Vol. 99, pp. 102-111

5. A statistical approach to prediction of the CMM drift behaviour using a calibrated mechanical artefact

   Metrology and Measurement Systems, Vol. 22, Núm. 3, pp. 417-428

6. Adjustment recommendations of a conoscopic holography sensor for a reliable scanning of surfaces with roughness grades obtained by different processes

   Precision Engineering, Vol. 42, pp. 335-345

7. An effective thickness to estimate stresses in laminated glass beams under dynamic loadings

   Composites Part B: Engineering, Vol. 82, pp. 1-12

8. Analyses of mixed continuous and discontinuous galerkin methods for the time harmonic elasticity problem with reduced symmetry

   SIAM Journal on Scientific Computing, Vol. 37, Núm. 4, pp. A1909-A1933

9. Analysis of viscoelastic behaviour of rock salt using hydraulic cylinder test

   Bulletin of Engineering Geology and the Environment, Vol. 74, Núm. 2, pp. 545-553

10. Analytical and numerical approach of an End Notched Flexure test configuration with an inserted roller for promoting mixed mode I/II

    Engineering Fracture Mechanics, Vol. 143, pp. 63-79

11. Análisis probabilístico de elementos de vidrio recocido mediante una distribución triparamétrica Weibull

    Boletín de la Sociedad Española de Cerámica y Vidrio, Vol. 54, Núm. 4, pp. 153-158

12. Application of hydraulic cylinder testing to determine the geotechnical properties of earth-filled dams

    Geomechanics and Engineering, Vol. 9, Núm. 4, pp. 483-498

13. Artificial neural networks applied to port operability assessment

    Ocean Engineering, Vol. 109, pp. 298-308

14. Assessing motorcyclist protection systems using finite element simulations

    International Journal of Simulation Modelling, Vol. 14, Núm. 1, pp. 110-120

15. Combined effect of steel fibre and expanded vermiculite on properties of lightweight mortar at elevated temperatures

    Materials and Structures/Materiaux et Constructions, Vol. 48, Núm. 7, pp. 2083-2092

16. Comparativa crítica entre las presas históricas extremeñas y las presas históricas construidas en el entorno de Siena

    Norba: Revista de arte, Núm. 35, pp. 223-233

17. Creep lifing methodologies applied to a single crystal superalloy by use of small scale test techniques

    Materials Science and Engineering A, Vol. 636, pp. 529-535

18. Cálculo de desplazamientos en placas de vidrio laminado sometidas a carga estática mediante el concepto de módulo de elasticidad efectivo

    Boletín de la Sociedad Española de Cerámica y Vidrio, Vol. 54, Núm. 2, pp. 69-76

19. Detailed territorial estimation of design thermal conductivity for façade materials in North-Eastern Spain

    Energy and Buildings, Vol. 102, pp. 266-276

20. Development of a methodology to study the hydrogen embrittlement of steels by means of the small punch test

    Materials Science and Engineering A, Vol. 626, pp. 342-351