Ciencia de los Materiales e Ingeniería Metalúrgica

2003

1. Analysis of the fatigue causes on the rotor bars of squirrel cage asynchronous motors: Experimental analysis and modelling of medium voltage motors

   IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives, SDEMPED 2003 - Proceedings

2. Caracterización de armaduras de refuerzo de acero inoxidable obtenidas mediante corrugado en caliente

   Avances en ciencia y tecnología del acero inoxidable II (Centro de Investigaciones Científicas Isla de la Cartuja), pp. 441-450

3. Comportamiento a fractura y a tracción de dos materiales compuestos expuestos a temperatura y humedad

   Revista de la Facultad de Ingenieria, Vol. 18, Núm. 3, pp. 33-38

4. Corrosion mechanism and wear prediction of the sole of an electric arc furnace

   ISIJ International, Vol. 43, Núm. 2, pp. 192-200

5. Fast curing for organic and inorganic coatings by high frequency induction

   Revue de Metallurgie. Cahiers D'Informations Techniques, Vol. 100, Núm. 6

6. Fast curing of organic and inorganic coatings by high frequency induction

   Revue de Metallurgie. Cahiers D'Informations Techniques, Vol. 100, Núm. 6, pp. 653-657

7. Formulation, structure and properties of carbon anodes from coal-tar pitch/petroleum pitch blends

   LIGHT METALS 2003

8. Grain size determinations in 1%C-13%Mn steels for railway crossings. Detection of anomalies during its processing

   Microscopy and Microanalysis

9. Influence of the damage sequence in the mechanical strength of a composite material of PEI reinforced with woven carbon-fabric. A statistical analysis

   Advanced Composites Letters, Vol. 12, Núm. 6, pp. 229-235

10. Mechanical behaviour and corrosion resistance of stainless steel cold rolled reinforcing bars

    Materials Science Forum

11. Mechanical properties and corrosion behaviour of stainless steel reinforcing bars

    Journal of Materials Processing Technology

12. Nodal wear model: corrosion in carbon blast furnace hearths

    Revista de metalurgia, Vol. 39, Núm. 3, pp. 183-192

13. Propiedades mecánicas de los aceros aleados al cromo utilizados en la fabricación de cilindros de apoyo de trenes de laminación

    Revista de metalurgia, Vol. 39, Núm. 2, pp. 107-113

14. Resistencia a la deslaminación en modos I y II de composites con matriz de PEI y refuerzo de tejido de fibra de vidrio con distinto entrelazado

    Informacion Tecnologica, Vol. 14, Núm. 3, pp. 57-60

15. Study of the dehydration process of vermiculites by applying a vacuum pressure: Formation of interstratified phases

    Mineralogical Magazine, Vol. 67, Núm. 6, pp. 1253-1268

16. Texture, formability, lamellar tearing and HIC susceptibility of ferritic and low-carbon HSLA steels

    Materials Characterization, Vol. 50, Núm. 1, pp. 81-86

17. Toughness of Si3N4 ceramics obtained by precipitating sintering aids as hydroxides

    Materials Characterization, Vol. 50, Núm. 1, pp. 11-22