Publicaciones (15) Publicaciones en las que ha participado algún/a investigador/a

2000

  1. Acero de alto silicio producido por inmersión en Al-Si y recocido de difusión

    Revista de metalurgia, Vol. 36, Núm. 5, pp. 339-347

  2. Caracterización mineralógica y textural de refractarios monolíticos moldeables

    Cadernos do Laboratorio Xeolóxico de Laxe: Revista de xeoloxía galega e do hercínico peninsular, Núm. 25, pp. 185-187

  3. Characterisation of NiCr flame and plasma sprayed coatings for use in high temperature regions of boilers

    Surface Engineering, Vol. 16, Núm. 2, pp. 137-142

  4. Characteristics and properties of lightweight concrete manufactured with cenospheres

    Cement and Concrete Research, Vol. 30, Núm. 11, pp. 1715-1722

  5. Comparison of the static and dynamic fracture behaviour of an AE-460 structural steel

    Engineering Fracture Mechanics, Vol. 66, Núm. 6, pp. 537-549

  6. Corrosión de la taza cerámica y las condiciones de operación de un alto horno

    RDM: Revista de Minas, Núm. 19, pp. 183-186

  7. Crack tip blunting analysis in the ductile-to-brittle transition of a structural steel

    Fatigue and Fracture of Engineering Materials and Structures, Vol. 23, Núm. 4, pp. 365-369

  8. Desgaste de los crisoles carbonosos en los altos hornos

    RDM: Revista de Minas, Núm. 19, pp. 187-194

  9. Effect of moisture on the tensile and interlaminar shear strengths of glass or carbon fiber reinforced PEI

    Journal of Materials Science Letters, Vol. 19, Núm. 7, pp. 579-581

  10. Metalurgía extractiva

    Síntesis

  11. Oxidación a alta temperatura de recubrimiento de CoNiCrAIY

    Boletín de la Sociedad Española de Cerámica y Vidrio, Vol. 39, Núm. 3, pp. 333-336

  12. Proceso siderúrgico: estado actual y perspectivas de futuro

    RDM: Revista de Minas, Núm. 19, pp. 173-181

  13. Prácticas y problemas de siderurgia

    Oviedo : Fundación Luis Fernández Velasco, 2000

  14. The Influence of Specimen Size on the Fracture Behavior of a Structural Steel at Different Temperatures

    Journal of Testing and Evaluation, Vol. 28, Núm. 4, pp. 276-281

  15. Using FEM to determine temperature distribution in a blast furnace crucible

    JOM, Vol. 52, Núm. 2, pp. 74-77