Publicaciones (27) Publicaciones en las que ha participado algún/a investigador/a

2018

  1. A study on the microstructural evolution of a low alloy steel by different shot peening treatments

    Metals, Vol. 8, Núm. 3

  2. Anodic lodes and scrapings as a source of electrolytic manganese

    Metals, Vol. 8, Núm. 3

  3. Aplicación del ajuste de Rietveld para correlacionar la evolución microestructural de fundiciones blancas con 18 y 25% en Cromo, templadas en aceite y sucesivos revenidos, con el comportamiento frente al desgaste abrasivo y esfuerzos de flexión

    Revista de metalurgia, Vol. 54, Núm. 1, pp. 113

  4. Concentrated solar energy applications in materials science and metallurgy

    Solar Energy, Vol. 170, pp. 520-540

  5. Desgaste abrasivo de fundiciones blancas altamente aleadas, sometidas a temple en aceite y sucesivos revenidos

    Trater Press: revista del tratamiento térmico, Núm. 65, pp. 28-33

  6. Deslaminación del barniz en procesos de corte y embutición de hojalata: minimización mediante aplicación de diseño de experimentos fraccionado

    Revista DYNA, Vol. 93, Núm. 3, pp. 339-344

  7. Effect of hydrogen on the tensile properties of 42CrMo4 steel quenched and tempered at different temperatures

    International Journal of Hydrogen Energy, Vol. 43, Núm. 18, pp. 9068-9082

  8. Effects of low intensity shot peening treatments applied with different types of shots on the fatigue performance of a high-strength steel

    Surface and Coatings Technology, Vol. 340, pp. 25-35

  9. Effects of nanofeatures induced by severe shot peening (SSP) on mechanical, corrosion and cytocompatibility properties of magnesium alloy AZ31

    Acta Biomaterialia, Vol. 66, pp. 93-108

  10. Enhanced fracture strength in the working layer of rolls manufactured in Ni-hard cast iron alloyed with Mo, Nb and Mg

    Metals, Vol. 8, Núm. 9

  11. Enhancement of biogas production from cattle manure pretreated and/or co-digested at pilot-plant scale. Characterization by SEM

    Renewable Energy, Vol. 126, pp. 897-904

  12. Experimental investigation of notch effect and ply number on mechanical behavior of interply hybrid laminates (glass/carbon/epoxy)

    Composites Part B: Engineering, Vol. 145, pp. 189-196

  13. Formability of aluminum 5083 friction stir welded blank in two-point incremental forming process

    Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Vol. 232, Núm. 3, pp. 267-280

  14. Heat treatment optimization in Al-Cu-Mg-Si alloys, with or without prior deformation

    Metals, Vol. 8, Núm. 10

  15. Influence of microstructure and shot peening treatment on corrosion resistance of AISI F55-UNS S32760 super duplex stainless steel

    Materials, Vol. 11, Núm. 6

  16. Iron metallurgy via concentrated solar energy

    Metals, Vol. 8, Núm. 11

  17. Mechanical surface treatments to optimize the fatigue behavior of quenched and tempered high strength steels

    International Journal of Advanced Manufacturing Technology, Vol. 96, Núm. 1-4, pp. 1225-1235

  18. Microporous composite SiO2-TiO2 spheres prepared via the peroxo route: Lead(II) removal in aqueous media

    Journal of Non-Crystalline Solids, Vol. 497, pp. 71-81

  19. Morphological optimization of graphite in spheroidal cast iron with a modulus of 4 cm used in the manufacture of wind turbine hubs

    Praktische Metallographie/Practical Metallography, Vol. 55, Núm. 7, pp. 447-467

  20. Nanosheets of Nonlayered Aluminum Metal–Organic Frameworks through a Surfactant-Assisted Method

    Advanced Materials, Vol. 30, Núm. 26