Departamento
Ciencia de los Materiales e Ingeniería Metalúrgica
Artículos (22) Publicaciones en las que ha participado algún/a investigador/a
2006
-
Calidad en la enseñanza: motivación en el aula día a día
Forum calidad, Año 18, Núm. 176, pp. 32-37
-
Comportamiento a desgaste de un compuesto de polieterimida reforzado con fibra de carbono
Revista de plásticos modernos: Ciencia y tecnología de polímeros, Núm. 605, pp. 441-444
-
Cyclic high temperature oxidation of HFPD thermal sprayed CoNiCrAlY coatings under simulated gas turbine and furnace environments
Surface Engineering, Vol. 22, Núm. 4, pp. 277-282
-
Effect of hygrothermomechanical aging on the interlaminar fracture behavior of woven fabric fiber/PEI composite materials
Journal of Thermoplastic Composite Materials, Vol. 19, Núm. 4, pp. 385-398
-
Effect of the addition of refiners and/or modifiers on the microstructure of die cast Al-12Si alloys
Scripta Materialia, Vol. 54, Núm. 5, pp. 943-947
-
El proyecto Euroing y el espacio europeo de educación superior
Fundidores: fundiciones ferreas y no ferreas en arena, coquilla y fundición a presión, Núm. 137, pp. 34-38
-
Estimación de la viscosidad de escorias fayaliticas utilizando el modelo de cálculo "kv" y el método experimental del plano inclinado
Revista de metalurgia, Vol. 42, Núm. 2, pp. 84-90
-
Fracture mechanics modelling of cracked aluminium panel repaired with bonded composite circular patch
Journal of Applied Sciences, Vol. 6, Núm. 9, pp. 2088-2095
-
Influence of Sr modification and Ti grain refinement on the morphology of Fe-rich precipitates in eutectic Al-Si die cast alloys
Scripta Materialia, Vol. 54, Núm. 9, pp. 1543-1548
-
Influence of the thermal-spray procedure on the properties of a CoNiCrAlY coating
Surface and Coatings Technology, Vol. 200, Núm. 18-19, pp. 5550-5556
-
Influencia de diversos tratamientos térmicos en la microestructura de una fundicion blanca con alto contenido en cromo
Revista de metalurgia, Vol. 42, Núm. 4, pp. 279-286
-
Influencia del coeficiente de asimetría en la formación y crecimiento de grietas interlaminares en un material compuesto sometido a fatiga
Revista de plásticos modernos: Ciencia y tecnología de polímeros, Núm. 605, pp. 437-440
-
Microestructura y oxidación cíclica en atmósferas con contenidos de oxígeno variables de un recubrimiento NiCrBSiFe proyectado térmicamente por plasma y HVOF
Revista de metalurgia, Vol. 42, Núm. 6, pp. 444-455
-
Microstructure and mechanical property developments in Al-12Si gravity die castings after Ti and/or Sr additions
Materials Characterization, Vol. 57, Núm. 4-5, pp. 218-226
-
Microstructure-properties correlation of pressure die cast eutectic aluminum-silicon alloys for escalator steps (Part I)
Materials Characterization, Vol. 56, Núm. 3, pp. 169-177
-
Microstructure-properties correlation of pressure die cast eutectic aluminum-silicon alloys for escalator steps (Part II)
Materials Characterization, Vol. 56, Núm. 3, pp. 178-184
-
Study of sulphidation and chlorination on oxidized SS310 and plasma-sprayed Ni-Cr coatings as simulation of hot corrosion in fouling and slagging in combustion
Corrosion Science, Vol. 48, Núm. 6, pp. 1319-1336
-
The effect of mechanically and chemically activated fly ashes on mortar properties
Fuel, Vol. 85, Núm. 14-15, pp. 2018-2026
-
The mechanism of thermal spalling in the wear of the pierce-smith copper converter
Journal of the Ceramic Society of Japan, Vol. 114, Núm. 1332, pp. 672-675
-
The sulfuric acid leaching of Bayer electrofilter fines: A practical kinetical approach
JOM, Vol. 58, Núm. 8, pp. 58-62